Table of Contents
Advertisement
6.3.2.2
Windrower
IMPORTANT
Until you become familiar with the sound
and feel of your new windrower, be extra
alert and attentive.
HRS
.25 Road or
1 in Field
Caster Wheel Anti-Shimmy
5
Walking Beam Width Adjustment
Walking Beam Width Adjustment
10
Intake/Radiator/Heater/Hydraulic
Walking Beam Width Adjustment
Caster Wheel Anti-Shimmy
50
Form 169017
WINDROWER TRACTOR OPERATION
WINDROWER BREAK-IN INSPECTION REQUIREMENTS
ITEM
Drive Wheel Nuts
A/C Belt
Caster Wheel Nuts
Dampener Bolts
Bolts
Bolts
Drive Wheel Nuts
Neutral
Hose Clamps – Air
Bolts
Dampener Bolts
Drive Wheel Nuts
Drive Wheel Lubricant
Main Gearbox Oil
Hydraulic Oil Filters
Before investigating an unusual sound or
attempting to correct a problem, place GSL
in N-DETENT, shut off engine, and remove
key.
Perform the checks and service in the following
table after the indicated hours of operation.
Refer to the specific section under reference for
service procedures:
CHECK
Torque – 175-200 ft-lbf (237-271 N·m)
Repeat Checks Until Torque Stabilizes.
Tension
Torque – 115-127 ft-lbf (156-172 N·m)
Inboard Bolt Torque – 100 ft-lbf (135 N·m).
Outboard Bolt Torque – 100 ft-lbf (135 N·m)
Torque – 330 ft-lbf (448 N·m)
Torque – 330 ft-lbf (448 N·m)
Torque – 175-200 ft-lbf (237-271 N·m)
Repeat Checks at 20 and 30 hours.
Dealer Adjust
Hand Tighten Unless Otherwise Noted.
Torque – 330 ft-lbf (448 N·m)
Inboard Bolt Torque – 100 ft-lbf (135 N·m).
Outboard Bolt Torque – 100 ft-lbf (135 N·m)
Torque 175-200 ft-lbf (237-271 N·m)
Repeat Checks Until Torque Stabilizes.
Change
Change
Change
51
DANGER
REF.
7.14.1
7.10.10.1
7.14.2
6.3.7
7.14.1
7.9.5,
7.9.7,
7.10.4,
7.10.7 &
7.13
6.3.7
7.14.2
7.14.1
7.14.1.3
7.9.8 &
7.10.8
7.13.4
Issue – June 2008
-
Advertisement
Table of Contents
