Header Controls; Header Engage Switch; Header Drive Reverse Button - MacDon M150 2008 Operator's Manual

5.16 HEADER CONTROLS

All header controls are conveniently located on
the operator's console and on the GSL handle.
NOTE
Some controls are optional equipment and
may not be present in your unit. Some
controls may be installed, but will be non-
functional for certain headers.
5.16.1

Header Engage Switch

Engages and disengages header drive.
HEADER DRIVE
ENGAGE – Pull Up
DISENGAGE – Push Down
IMPORTANT
Always move throttle lever back to idle
before engaging header drive.
engage header with engine at full RPM.
Form 169017
OPERATOR'S STATION
5.16.2
Reverses knife and conditioner on D Series
draper headers.
Reverses reel, auger, knife and conditioner on A
Series auger headers.
Not applicable for R Series rotary headers.
Do not
27

Header Drive Reverse Button

HEADER REVERSE
ENGAGE – Push/Hold/Engage Header
DISENGAGE – Release Button
NOTE
To re-engage header drive, push down
and pull up header drive knob.
Issue – June 2008