Auger Speed - MacDon M150 2008 Operator's Manual

6.6.3

Auger Speed

6.6.3.1 A30-S and A30-D Headers
On A30 Series auger headers, the auger speed
is fixed to the reel speed.
NOTE
The auger speed can be independently
changed from the reel speed by changing
the drive sprocket. Refer to A30-S, A30-D
& A40-D Self
Headers OPERATOR'S MANUAL.
Display the auger speed as follows:
CAUTION
Check to be sure all bystanders have cleared
the area.
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
ON GSL PRESS SELECTOR BUTTON
OR SELECT SWITCH ON CDM FOR
##.# AUGER SPEED
##.# = 00.0 – 99.0
00.0 = 150 rpm
* 99.0 = 320 rpm
* Auger Speed Not To Exceed 320 rpm.
HEADER INDEX
Form # 169017
HEADER OPERATION – A SERIES
Propelled Windrower
DISPLAY
DISPLAY
SELECTOR
98
6.6.3.2 A40-D Headers
On A40-D double knife headers, the auger
speed can be changed independently from the
reel speed with a switch on the CDM.
CAUTION
Check to be sure all bystanders have cleared
the area.
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
PRESS DISPLAY SELECTOR
FOR ##.# AUGER SPEED
ON CDM PRESS
FAST OR SLOW
DISPLAY SHOWS
##.# AUGER SPEED
NO
SPEED
O.K.?
DONE
* Auger Speed Not To Exceed 320 rpm.
HEADER INDEX
##.# = 00.0 – 99.0
00.0 = 150 rpm
* 99.0 = 320 rpm
YES
DISPLAY
FAST
SLOW
DISPLAY
SELECTOR
Issue – June 2008