MacDon M150 2008 Operator's Manual page 131

J
o. Insert primary filter element (J) into canister over
secondary element
ensuring that element is firmly seated in
canister.
G
F
p. Position end cap (F) onto filter housing with
vacuator valve pointing approximately down.
q. Align arrow (H) to unlock position on end cap
and push end cap fully onto housing.
r. Rotate end cap clockwise until catch (G)
engages housing to prevent end cap from
turning.
s. Close engine compartment hood.
Form 169017
MAINTENANCE/SERVICE – M150 ENGINE
and push into place,
H
7.9.5.2 Charge Air Cooling
After the intake air passes through the air filter, it
passes through the turbocharger which boosts
the pressure. This process heats the air so it is
passed through a cooler before entering the
engine intake.
cooling box behind the radiator and should be
cleaned daily with compressed air.
Section 7.11.2, Cooling Box Maintenance.
129
The cooler is located in the
Refer to
Issue – June 2008