Console Header Switches - MacDon M150 2008 Operator's Manual

5.16.3.3 Header Position Switches
HEADER UP
HEADER
TILT DOWN
HEADER DOWN
Press and hold switch at location shown to move
header.
Release switch at desired position.
5.16.3.4 Reel & Disc Speed Switches
REEL / DISC
SPEED
FAST
SLOW
Press and hold switch at location shown to
change reel or disc speed.
Release switch at desired speed.
Auger Header
Auger speed automatically adjusts when reel
speed is changed.
IMPORTANT
Reel speed on auger header must not
exceed 85 rpm.
exceed 320 rpm.
Draper Header
Reel speed is limited in INDEX HEADER
SPEED mode.
Form 169017
OPERATOR'S STATION
HEADER
TILT UP
Auger speed not to
29
Rotary Header
Conditioner speed automatically adjusts when
disc speed is changed.
5.16.4

Console Header Switches

The operator's console contains switches for the
following header functions that are most often
used while the windrower is stationary.
5.16.4.1 Deck Shift/Float Preset Switch
Draper Header with Deck Shift Option -
LEFT SIDE
DELIVERY
Controls deck shifting for double windrowing
options with a draper header.
Draper Header
Header/Rotary Header
FLOAT
PRESET 1
Selects pre-programmed header float settings.
Refer to Section 6.4.2 Flotation, for instructions
to preset the float.
CENTER RIGHT SIDE
DELIVERY DELIVERY
with Fixed Decks/Auger
FLOAT FLOAT
PRESET 2 PRESET 3
Issue – June 2008