Table of Contents
Advertisement
k. Remove pin (N) from storage position in linkage
and insert in hole (O) to engage float springs.
Secure with hairpin.
l.
Disengage lift cylinder stops.
m. Start engine and activate header lift cylinders
(switch on GSL) to lower header fully.
n. Stop engine and remove key.
Q
HEADER DRIVE HOSES
o. Connect header drive (P) and electrical harness
(Q) to header.
Refer to the Draper Header
Operator's Manual.
R
REEL HYDRAULICS
p. Connect reel hydraulics (R) at RH side of tractor.
Form 169017
HEADER OPERATION – D SERIES
N
O
P
85
Issue – June 2008
Advertisement
Table of Contents
