Table of Contents
Advertisement
7.12.11
Circuit Breakers and Fuses
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
The circuit breakers and fuses are located inside
the fuse box that is mounted on the frame under
the right cab-forward side platform. The circuit
breakers automatically reset and the fuses are
the plastic blade type.
Access the breakers and fuses as follows:
a. Stop engine and remove key.
b. Move right cab-forward side platform rearward
(cab-forward).
B
c. Remove wing nut (A) and remove fuse box
cover (B).
d. Refer
to
decal
identification of fuses and circuit breakers. See
illustration next page.
Form 169017
MAINTENANCE/SERVICE
A
on
inside
of
cover
7.12.11.1 Checking/Replacing Fuses
a. To check fuse, pull fuse (C) out of receptacle
and visually examine.
b. To replace fuse, insert new fuse into receptacle.
Replacement fuses should match rating
on decal shown on following page.
7.12.11.2 Replacing Circuit Breakers
a. To replace circuit breaker (D), pull breaker out of
receptacle, and install new circuit breaker.
b. To replace relay (E), pull relay out of receptacle,
and install new relay.
c. Reinstall cover and secure with wing nut.
for
181
C
IMPORTANT
D
(continued next page)
Issue – June 2008
E
Advertisement
Table of Contents
