Table of Contents
Advertisement
5.16.3
GSL Header Switches
The GSL (A) contains switches for the following
header functions that are most often adjusted
while in operation to suit changing crop
conditions. All are momentary type switches. A
decal that identifies the switch functions is
located on the cab post above the operator's
console.
A
Form # 169017
OPERATOR'S STATION
B
28
5.16.3.1 Display Selector Switch
Selects and displays the settings in the CDM (B)
top line read-out for each of the header controls.
Press switch to scroll through settings.
5.16.3.2 Reel Position Switches
REEL FORWARD
REEL DOWN
NOTE
Reel position switches work only on
draper headers.
Press and hold switch at location shown to move
reel.
Release switch at desired position.
DISPLAY
SELECTOR
DWA DOWN
REEL UP
REEL AFT
DWA UP
Issue – June 2008
Advertisement
Table of Contents
