Training Seat; Seat Belts; Steering Column Adjustment - MacDon M150 2008 Operator's Manual

5.4 TRAINING SEAT

B
A
A wall mounted fold-up training seat complete
with seat belt is provided for use as described
below. To lower seat, lift latch (A) and lower
seat (B). For storage, lift seat (B) and secure
with latch (A).
WARNING
•
The training seat is provided for an
experienced operator of the machine
when a new operator is being trained.
•
The training seat is NOT intended as a
PASSENGER SEAT or FOR USE BY
CHILDREN.
•
USE THE
operating the machine or riding as a
trainer.
•
KEEP ALL OTHER RIDERS OFF THE
MACHINE.

5.5 SEAT BELTS

The windrower tractor is equipped with a seat
belt on the Operator's and Trainer's seats.
WARNING
•
Before starting engine, securely fasten
your seat belt and ensure trainer's seat
belt is fastened if occupied. The seat belt
can help insure your safety if it is used
and maintained.
•
Never wear a seat belt loosely or with
slack in the belt system.
•
Never wear the belt in a twisted condition
or pinched between the seat structural
members.
Form 169017
OPERATOR'S STATION
B
A
SEAT BELT whenever
a. To fasten seat belt, pull belt completely across
your body. Push the metal eye into the buckle
until it locks. Adjust the position of the belt as
low on your body as possible.
SEAT BELT
RELEASE
b. To release, push the red button in the end of the
buckle and separate the buckle and metal eye.

5.6 STEERING COLUMN ADJUSTMENT

The steering column can be adjusted to suit
each particular operator and for easier entry to
and exit from the seat.
C
a. Hold onto steering wheel, lift handle (C), and
move steering wheel up or down to desired
position.
b. Release handle (C) to lock steering wheel
position.
19
Issue – June 2008