Operator's Station; Operator Console - MacDon M150 2008 Operator's Manual

5 OPERATOR'S STATION

The operator's station is designed for operating
the windrower tractor in a cab forward mode
(working mode), or in an engine forward mode
(transport mode). The operator station, which
includes the seat, console, and steering column,
pivots 180° so that the operator maintains
access to the windrower controls and gauges
regardless of the direction of travel.

5.1 OPERATOR CONSOLE

ENGINE/WINDROWER CAB
DISPLAY MODULE (CDM)
SECTION 5.17
THROTTLE
GROUND SPEED CONTROLS
SECTION 5.15
The console contains controls to operate the
windrower as well as amenities for the operator.
The console position is adjustable to suit each
particular operator. The console is attached to
the seat and does not require adjustment when
repositioning the operator's seat.
Form 169017
OPERATOR'S STATION
a. To adjust height and fore-aft, pull lever (A) and
HEADER
CONTROLS
SECTION 5.16
b. To adjust only fore-aft, loosen nuts (B) under
c. Tighten nuts.
17
A
slide console to desired position. Release lever
to lock console.
console and move as required.
B
Issue – June 2008