MacDon M150 2008 Operator's Manual page 93

Self-propelled windrower
Table of Contents

Advertisement

6.5.4.2
Draper Minimum Speed
Set the minimum draper speed as follows:
IMPORTANT
Windrower cannot be moving.
This procedure can also be used to
change the draper speed "on the go".
These changes become the new set-
points.
CAUTION
Check to be sure all bystanders have cleared
the area.
ENGAGE HEADER
HEADER INDEX
SWITCH - ON
PRESS DISPLAY SELECTOR
FOR DRAPER MIN
ON CDM PRESS
FAST OR SLOW
DISPLAY SHOWS
##.# DRAPER MIN
NO
HEADER INDEX
Form 169017
HEADER OPERATION – D SERIES
NOTE
##.# = MPH or KPH
SPEED
O.K.?
YES
DONE
DISPLAY
FAST
SLOW
DISPLAY
SELECTOR
DISPLAY will flash ##.# MIN CONV (MPH
or KPH) to prompt the operator to change
the minimum set point or increase ground
speed if Ground Speed Plus Index is less
than the Minimum Draper Speed Set
Point.
6.5.4.3
Draper Speed Independent of Ground
Speed
Set the speed of the draper independently of
ground speed as follows:
This procedure can also be used to
change the draper speed "on the go".
Check to be sure all bystanders have cleared
the area.
NO
91
NOTE
NOTE
CAUTION
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
PRESS DISPLAY SELECTOR
FOR DRAPER SPEED
ON CDM PRESS
FAST OR SLOW
DISPLAY SHOWS
##.# DRAPER SPEED
##.# = MPH or KPH
SPEED
O.K.?
YES
DONE
Issue – June 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

M200 2008M150M200

Table of Contents