Table of Contents
Advertisement
6.3.5
Engine Operation
6.3.5.1
Starting
DANGER
Avoid possible injury or death from a
runaway machine.
•
This machine has safety devices which
allow the engine to start only when the
ground speed lever is in N-DETENT, the
steering wheel is locked in the neutral
position, and the header drive switch is
in
the
OFF
circumstances are these devices to be
deliberately rewired or misadjusted so
that the engine can be started with
controls out of neutral.
•
Do not start engine by shorting across
starter
or
Machine will start with drive engaged and
move if normal starting circuitry is
bypassed.
•
Start engine only from operator's seat
with controls in neutral.
engine while standing on ground. Never
try to start engine with someone under or
near machine.
•
Before starting engine, be sure there is
plenty
of
asphyxiation.
IMPORTANT
Do not tow machine to start engine.
Damage to hydrostatic drives will result.
WARNING
Before starting engine, securely fasten your
seat belt and ensure trainer's seat belt is
fastened if occupied. The seat belt can help
insure
your
safety if
maintained.
Form 169017
WINDROWER TRACTOR OPERATION
position.
Under
starter
relay
terminals.
NEVER start
ventilation
to
it
is
used
A
a. Lock (A) should be engaged at cab forward or
engine forward position.
no
b. Move GSL (B) into N-DETENT.
c. Turn steering wheel until it locks.
d. Fasten seat belt.
F
avoid
e. Push header drive switch (C) to off.
f.
Normal Start - engine temperature above 60°F
(16°C):
1. Set throttle (D) to start position (E) – fully
back.
The machine gauges and instruments
provide
machine
Familiarize yourself with the gauges and
and
monitor them carefully during start-up
operation. Refer to Section 5.14, Engine
Controls/Gauges.
Be sure the area is clear of other persons,
pets etc. before proceeding.
53
B
D
E
OFF
RUN
IMPORTANT
important
information
operation
and
CAUTION
(continued next page)
Issue – June 2008
B
C
START
about
condition.
Advertisement
Table of Contents
