MacDon M150 2008 Operator's Manual page 34

CAB FORWARD/ENGINE RUNNING/HEADER DISENGAGED
(Scroll Through Display with CDM Switch or GSL Switch)
DISPLAY (Lower or Upper Line)
#####.# ENGINE HRS
#####.# HEADER HRS
###.# SUB ACRES
###.# SUB HECTARES
###### TOTAL ACRES
###### TOTAL HECT
##.# HEADER HEIGHT
##.# HEADER ANGLE
##.# L FLOAT R ##.#
##.# VOLTS
SCROLL
(Lower Line)
Form # 169017
OPERATOR'S STATION
Total Engine Operating Time.
Total Header Operating Time.
Area Cut Since Last Reset. To Reset, Display SUB
ACRES On Lower Line And Hold Down Program Switch
(If Metric)
Until Display Resets (5-7 Seconds).
Total Area Cut By Machine.
(If Metric).
Distance Setting (00.0-10.0) Between Cutterbar &
Ground.
Angle Setting (00.0-10.0) Header Relative to Ground.
Float Setting (0.0-9.9).
Engine Electrical System Operating Voltage.
Displays Above Items After 2-3 Seconds. Press SELECT
to cancel.
32
DESCRIPTION
Issue – June 2008