Two-Sided Copying - Canon MG5500 series Online Manual

Two-Sided Copying

When you select 2-sided for 2-sidedPrintSetting in Standard copy, you can copy two original pages onto
the both sides of a single sheet of paper.
Press the right Function button to select the orientation and the stapling side.
• When you select Portrait for Orientation and Long-side stapling for Stapling side of print paper:
• When you select Portrait for Orientation and Short-side stapling for Stapling side of print paper:
• When you select Landscp. for Orientation and Long-side stapling for Stapling side of print paper:
• When you select Landscp. for Orientation and Short-side stapling for Stapling side of print paper:
After selecting the stapling side and press the OK button, you can select whether you use the preview
screen. If you select ON, the preview screen is displayed so that you can check the orientation.
Note
• If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the print
quality to Standard, then try copying again. If the problem is not resolved, set the print quality to Draft
and try copying again.
• Two-sided copy setting can be used in combination with 2-on-1 copy or 4-on-1 copy when Standard
copy is selected.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
111