Replacing The Stamp Cartridge (Feeder) - Canon imageRUNNER Advance 4251 Basic Operation Gude

Replacing the Stamp Cartridge
(Feeder)
Originals sent via the feeder can be stamped to indicate that they have been sent. Replace the stamp cartridge when the stamp
mark is faint or no longer visible.
When replacing the stamp cartridge, take care not to allow ink to come into contact with your hands or clothing. If ink gets onto
your hands or clothing, wash it off immediately with cold water.
The feeder is standard-equipped for the imageRUNNER ADVANCE 4251/4245.
Open the covers.
1
Load the stamp cartridge.
2
• Make sure that the stamp cartridge is not protruding from the surface.
• Insert the stamp cartridge properly, or paper jams may occur.
78
1. Pull the lever  open the
feeder cover.
2. Open the inner cover,
holding it by its tab.
1. Remove the old stamp
cartridge, using tweezers.
2. Push in the new stamp
cartridge until it clicks, using
tweezers.