Replacing the Stamp Ink Cartridge
When you send or fax documents, originals fed into the feeder can be stamped to
indicate that they have been scanned already. If you notice that this mark is faint or
no longer visible, replace the stamp ink cartridge as described below.
IMPORTANT
• When replacing the stamp ink cartridge, take care not to allow ink to come into contact
with your hands or clothing. If ink gets onto your hands or clothing, wash it off
immediately with cold water.
• The Stamp mode is available only when the optional Stamp Unit-B1 is attached to the
feeder (optional for the imageRUNNER 2545/2535/2530/2525/2520).
1
2
Open the inner cover, holding it by the front tab.
Open the feeder cover.
Tab
Replacing the Stamp Ink Cartridge
5
5-25