Feeder (DADF-P2)
Originals sent by the Send function or fax via the feeder, can be stamped to indicate that they
have been sent. Replace the stamp cartridge when this mark is faint or no longer visible.
IMPORTANT
When replacing the stamp cartridge, take care not to allow ink to come in contact with your hands or
clothing. If ink gets onto your hands or clothing, wash it off immediately with cold water.
NOTE
• This procedure is necessary only if the feeder (DADF-P2) is attached.
• The stamp cartridge is optional.
Replacing the Stamp Cartridge
1
7
7-14
Feeder (DADF-P2)
Open the feeder cover, then open the inner cover by holding its front
tab.
Stamp Cartridge
Inner Cover