Before Using the
Machine
1
Document and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Printing Received Documents
The machine provides the following printing features: two-sided
printing and received image reduction.
Two-Sided Printing
You can print received documents on both sides of the paper.
The default setting is <OFF>.
You can print the received documents on both sides of the paper only
when <PAPER SIZE> is set to <A4> or <LTR>. The received documents are
printed on one side of the paper when <PAPER SIZE> is not set to <A4> or
<LTR>. (See "Setting Paper Size and Type, " on p. 2-13.)
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press [
] or [
] to select <PRINTER
SETTINGS>, then press [OK].
4.
Press [
] or [
] to select <2-SIDED PRINT>,
then press [OK].
5.
Press [
] or [
] to select <ON>, then press
[OK].
6.
Press [Stop/Reset] to return to the standby
mode.
Back
Previous
Received Image Reduction
You can print received documents in a reduced size.
The default setting is <ON>.
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press [
] or [
] to select <PRINTER
SETTINGS>, then press [OK].
4.
Press [
] or [
] to select <RX REDUCTION>,
then press [OK].
TOP
Next
4-33