Printing Received Documents
You can set the method of printing them.
Reducing a Received Document
You can set the machine to automatically reduce received documents so that the
whole document is printed within the printable area of the paper.
The following settings are available if you set the Receive Reduction to 'ON':
•
RX REDUCTION:
- AUTO SELECTION:
- FIXED REDUCTION: You can select a preset reduction ratio (97%, 95%, 90%*,
•
REDUCE DIRECTION: You can select the direction to reduce the document, as
- VERTICAL ONLY:
- HORIZ & VERTICAL: The image is reduced in both the vertical and horizontal
NOTE
The default settings are:
- Receive Reduction: 'ON'
- RX Reduction:
- Reduce%:
- Reduce Direction:
You can select to reduce the document automatically or
set a preset reduction ratio, as follows.
The image is automatically reduced by a suitable
reduction ratio.
or 75%).
follows.
The image is reduced in the vertical direction only.
directions.
'Auto'
'90%'
'Vertical Only'
Printing Received Documents
6
6-23