Printing Received Documents
You can set the method of printing them.
Printing in Reduced Form
Follow the procedure below to set the machine to print received documents in a
reduced size.
If you set the <RECEIVE REDUCTION> to <ON>, you can set the following
settings:
•
RECEIVE REDUCTION (AUTO SELECTION*/FIXED REDUCTION): You can
select to reduce the document automatically when the paper pf adequate size
runs out, or select a preset reduction ratio.
•
FIXED REDUCTION (97%, 95%, 90%*, or 75%): You can select a preset
6
reduction ratio.
•
REDUCE DIRECTION (VERTICAL ONLY*, or HORIZ & VERTICAL): You can
select to reduce the document both vertically and horizontally, or just vertically at a
fixed reduction ratio.
An asterisk (*) indicates the default settings.
NOTE
The factory default setting for <RECEIVE REDUCTION> is 'ON'.
1
OK
6-24
Printing Received Documents
Press [Additional Functions]
<FAX SETTINGS> appears
If necessary, see the screen shots in steps 1 and 2 of "Printing Methods," on
p. 4-5.
press [
] or [
press [OK].
] until