Output Assemblies (Converter Consumes); Ethernet/Ip Basic Speed Control Output - 20 (0X14) - YASKAWA SI-EN3D Technical Manual

10 Output Assemblies (Converter Consumes)

Name
oPE
Uv
LOCAL/REMOTE
Multi-Function Digital Output 1
Multi-Function Digital Output 2
Multi-Function Digital Output 3
Output Frequency
Dynamic Inputs
10 Output Assemblies (Converter Consumes)
Note:
The convention in this manual is from the PLC perspective. As such, an assembly is called an "Output Assembly" when outputted from
the PLC and received by this node. This section details "Output Assemblies" that are "Consumed" by the converter.
◆

EtherNet/IP Basic Speed Control Output - 20 (0x14)

Output Instance Word
0
20
1
66
oPE
0: -
1: oPExx
Undervoltage
0: -
1: Undervoltage
Run command is from network
0: Run command is not from network
1: Run command is from network
Terminal M1/M2 (varies by drive model)
0: M1/M2 OFF
1: M1/M2 ON
This function is enabled only when H2-01 is set to F.
Note:
The names of the digital outputs are different for different drive series.
Terminal M3/M4 (varies by drive model)
0: M3/M4 OFF
1: M3/M4 ON
This function is enabled only when H2-02 is set to F.
Note:
The names of the digital outputs are different for different drive series.
Terminal M5/M6 (varies by drive model)
0: M5/M6 OFF
1: M5/M6 ON
This function is enabled only when H2-03 is set to F.
Note:
The names of the digital outputs are different for different drive series.
Actual Drive Speed
Monitors drive output frequency.
Unit depends on o1-03.
Unit is not affected by Speed Scale SS.
Contains the data to be read from the MEMOBUS/Modbus address defined in the given parameter. A value of 0 in the given
parameter means it will return the default data as defined in the table above.
Byte Bit 7 Bit 6
0 - -
1
2
3
Description
Bit 5 Bit 4 Bit 3
- - -
-
D1000: Voltage Reference (Low Byte)
R1000: -
D1000: Voltage Reference (High Byte)
R1000: -
YASKAWA SIEP C730600 0DB EtherNet/IP Technical Manual
Bit 2 Bit 1 Bit 0
D1000: Run
Fault Reset -
R1000: Auto
Run