Ethernet/Ip Page - YASKAWA SI-EN3D Technical Manual
Hide thumbs
Also See for SI-EN3D:
- Technical manual (72 pages) ,
- Installation manual (80 pages) ,
- Installation manual (50 pages)
Table of Contents
Advertisement
15 Web Interface
◆
EtherNet/IP Page
The EtherNet/IP page shows basic information about the protocol. Up to two connections can be active at a time.
The connections will show which assemblies are used and what type of connection it is.
At the bottom of the page, the EDS file for attached drive can be downloaded. This can be used in the PLC
software.
Network Monitor
Originator IP Address
Timeout Multiplier
O2T RPI
112
Figure 15.1 Home Page View
Figure 15.2 EtherNet/IP Page View
The IP address of the master PLC on the network
If a packet is not received in the time specified by the RPI times the Connection Timeout Multiplier, the connection is
broken.
Requested Packet Interval between the originator (PLC) and the target (drive)
Explanation
YASKAWA SIEP C730600 0DB EtherNet/IP Technical Manual
Advertisement
Table of Contents
