Attributes Supported; Web Interface; Home Page - YASKAWA SI-EN3D Technical Manual

Yaskawa Monitor/Control object is related to the parameters or monitors of Yaskawa drives. Not compatible with
the EtherNet/IP compatible drives from another company. With this Class object any parameter or monitor with a
MEMOBUS/Modbus address less than 0x0100 can be accessed. In this class, the most significant byte of
MEMOBUS/Modbus address is always zero and the Instance ID remains at 1. Other than that, it is the same as
Yaskawa Drive Parameters object 100 (Class0x64).
Given a typical MEMOBUS/Modbus Address 0f 0x00YY
The EtherNet/IP Instance value is equal to 0x01
The EtherNet/IP Attribute value is equal to YY
As an example, to access Drive Status (MEMOBUS/Modbus Address = 0x002C)
Class Object is 125 (0x7D) (Always for this Class Object)
Instance = 0x01
Attribute = 0x2C
■

Attributes Supported

Instance ID Attribute
0 1
1 1
1 2
.. ..
1 255
Note:
1. Refer to Explicit Message Communications Errors on page 119
2. Refer to the MEMOBUS/Modbus Data Table in the MEMOBUS/Modbus Communications chapter of the drive manual for a list of
monitor data using the MEMOBUS/Modbus message area.
15

Web Interface

The option contains a series of web pages that let you use a standard web browser to view status and diagnostic
information.
The web page is accessed through a self-contained web server at port 80. Type the IP address of the option into a
web browser to access the home page. Example: "http://192.168.1.20" The IP address of the option can be read
using monitors U6-80 to U6-83 [Option IP Address 1 to Option IP Address 4] on the keypad if it is unknown.
Refer to Table 6.1 for more information.

• Home Page

• EtherNet/IP Page
• Network Page
• Ring Page
• Chart Page
• Email Alerts Page
• Parameter Access Page
• Settings Page
◆
Home Page
The Home page shows the status of the drive and the I/O. It also shows identifying information about the drive
and the option.
YASKAWA SIEP C730600 0DB EtherNet/IP Technical Manual
Name
Object Software Revision Shows Yaskawa Monitor/Control
Object Software Revision.
0x0001 Drive Command Bits
0x0002 Frequency Instruction
.. ..
0x00FF Reserved
Description Get Set
○
○
○
○
○
for error codes.
15 Web Interface
Size Range
- Word -
○ Word -
○ Word -
○ Word -
○ Word -
Default
1
0
4
-
-
111