Install The Option On A Ga500 Drive - YASKAWA SI-EN3D Technical Manual

2 Overview
Drive
U1000L
Z1000
Z1000U
*2
GA500
*2
GA700
*2
GA800
*2
HV600
*3
FP605
*1 Refer to "PRG" on the drive nameplate for the software version number.
*2 Before you install the option on a GA500, GA700, GA800, or HV600 drive, make sure that the option software version is PRG: 0345
or later.
*3 Before you install the option on an FP605 drive, make sure that the option software version is PRG: 0347 or later.
Note:
• Refer to the option package labeling in the field designated "PRG (four digit number)" to identify the option software version.
• For Yaskawa customers in the North or South America regions:
If your product is not listed in
provides a list of option manuals by product, and a direct link to download a PDF of the manual.
Scan QR code Or refer to:
http://www.yaskawa.com/optionlookup
◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit
model is: JOHB-GA50. This kit is sold separately.
Refer to the option card mounting kit manual for more information about installation.
10
CIMR-UxxWxxxx
CIMR-UxxLxxxx
CIMR-UxxFxxxx
CIMR-UxxRxxxx
CIMR-UxxSxxxx
CIMR-ZxxAxxxx
CIMR-ZxxUxxxx
CIMR-ZxxExxxx
CIMR-ZxxPxxxx
CIMR-ZxxWxxxx
CIPR-GA50xxxxx
CIPR-GA70xxxxx
CIPR-GA80xxxxx
CIPR-HV60xxxxx
CIPR-FP65xxxxx
Table 2.1, refer to the web page below to confirm this manual is correct for your product. The web page
Model
YASKAWA SIEP C730600 0DB EtherNet/IP Technical Manual
*1
Software Version
≥ 6210
≥ 1014
≥ 6113
≥ 1010
≥ 1010
≥ 9010
≥ 1011
≥ 1010