Installation Tools; Option Components; Communication Modular Connector Cn1 Port 1/Port 2 - YASKAWA SI-EN3D Technical Manual

Hide thumbs Also See for SI-EN3D:
Table of Contents

Advertisement

4 Option Components

*1
GA500, GA700, and GA800 drives do not use the ground wire.
*2
GA700, GA800, HV600, and FP605 drives use two screws only.
*3
LED label has transparent background and white letters. Please make sure that you use the correct label for Z1000, HV600, or
FP605.
*4
Options purchased in Japan do not include LED labels for Z1000, HV600, or FP605.

Installation Tools

You can use these tools to install the option to the drive:
• A Phillips screwdriver or slotted screwdriver (blade depth: 0.4 mm (0.02 in), width: 2.5 mm (0.1 in))
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
*1
Phillips screw sizes are different for different drive capacities. Prepare different screwdrivers for different
screw sizes.
4
Option Components
Option
A - Connector (CN5)
B - Installation hole
C - LED (NS)
*1
D - LED (MS)
*1
E - Option PCB
F - Ground terminal (FE) and installation hole
G - Port 1 LED (10/100)
*1
Refer to
Option LED States on page 13
*2
Connect the included ground wire during installation. The ground wire is not necessary for installation on GA700 and GA800 drives.
For GA500, connect the included ground wire to the separately sold communication option case (model: JOHB-GA50).

Communication Modular Connector CN1 Port 1/Port 2

The communication modular connector CN1 on the option is a modular dual RJ45 female connector designated
port 1 and port 2. Port 1 and port 2 are the connection points for a customer-supplied male EtherNet/IP network
communication cable.
12
Option Contents
Z1000, HV600, and FP605
Manuals
*1
Figure 4.1 Option
for more information about the LEDs.
*3
H - Option modular connector CN1 port 1 (RJ45)
I - Port 1 LED (LINK/ACT)
J - Port 2 LED (10/100)
K - Option modular connector CN1 port 2 (RJ45)
L - Port 2 LED (LINK/ACT)
M - Communication connector CN1
*2
YASKAWA SIEP C730600 0DB EtherNet/IP Technical Manual
Quantity
*4
1
1
*1
*1
*1
*1
.

Advertisement

Table of Contents
loading

Table of Contents