(Vendor Specific Yaskawa Electric (Ye) Assy) 18-Byte Dynamic Input - 169 (0Xa9) - YASKAWA SI-EN3D Technical Manual

Hide thumbs Also See for SI-EN3D:
Table of Contents

Advertisement

Name
Running
ZSP
REV Running
Fault Reset
Speed Agree
Ready
Alarm
Faulted
oPE
Uv
LOCAL/REMOTE
Multi-Function Digital Output 1
Multi-Function Digital Output 2
Multi-Function Digital Output 3
Output Frequency
Dynamic Inputs
(Vendor Specific Yaskawa Electric (YE) Assy) 18-Byte Dynamic Input - 169
(0xA9)
Input Instance
Word
169
0
YASKAWA SIEP C730600 0DB EtherNet/IP Technical Manual
Running
0: Stop
1: Forward or Reverse Running
Zero Speed
0: Running
1: Stop or DC Injection Braking
Reverse Running
0: Not Reverse Running
1: Reverse Running
Fault Reset
0: -
1: Fault Reset
Speed Agree
0: -
1: Speed actual at speed reference
Ready
0: Not Ready
1: Ready
Alarm
0: No Alarm
1: Alarm
Faulted
0: No Fault
1: Fault
oPE
0: -
1: oPExx
Undervoltage
0: -
1: Undervoltage
Run command is from network
0: Run command is not from network
1: Run command is from network
Terminal M1/M2 (varies by drive model)
0: M1/M2 OFF
1: M1/M2 ON
This function is enabled only when H2-01 is set to F.
Note:
The names of the digital outputs are different for different drive series.
Terminal M3/M4 (varies by drive model)
0: M3/M4 OFF
1: M3/M4 ON
This function is enabled only when H2-02 is set to F.
Note:
The names of the digital outputs are different for different drive series.
Terminal M5/M6 (varies by drive model)
0: M5/M6 OFF
1: M5/M6 ON
This function is enabled only when H2-03 is set to F.
Note:
The names of the digital outputs are different for different drive series.
Actual Drive Speed
Monitors drive output frequency.
Unit depends on o1-03.
Unit is not affected by Speed Scale SS.
Contains the data to be read from the MEMOBUS/Modbus address defined in the given parameter. A value of 0 in the given
parameter means it will return the default data as defined in the table above.
Byte
Bit 7
Bit 6
0
Faulted
Alarm
9 Input Assemblies (Drive Produces)
Description
Bit 5
Bit 4
Bit 3
Ready
Speed Agree
Fault Reset
Bit 2
Bit 1
Bit 0
REV Running
ZSP
Running
63

Advertisement

Table of Contents
loading

Table of Contents