Install The Option On A Ga500 Drive; Receiving - YASKAWA SI-P3 PROFIBUS-DP Technical Manual

◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit
model is: JOHB-GA50. This kit is sold separately.
Refer to the option card mounting kit manual for more information about installation.
A - Option card mounting kit components (sold
separately)
B - Option
3

Receiving

After you receive the option package:
• Make sure that there is no damage to the option and no parts are missing.
The Yaskawa warranty does not include damage from shipping. If there is damage to the option or other parts,
contact the shipping company immediately.
NOTICE Damage to Equipment. Do not use damaged parts to connect the drive and the option. Failure to comply
could damage the drive and option.
• Make sure that the model number on the option nameplate and the model number on the purchase order are the
same. Refer to Figure 4.1
• Contact the distributor where you purchased the option or contact Yaskawa or a Yaskawa representative about
any problems with the option.
YASKAWA SIEP C730600 82E PROFIBUS-DP Technical Manual
Figure 2.1 Option Card Mounting Kit (JOHB-GA50)
for more information.
C - Drive front cover
3 Receiving
7