Install The Option On A Ga500 Drive; Receiving - YASKAWA SI-C3 Technical Manual

Ac drive option cc-link

Hide thumbs Also See for SI-C3:

Table of Contents

◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit

model is: JOHB-GA50. This kit is sold separately.

Refer to the option card mounting kit manual for more information about installation.

A - Option card mounting kit components (sold

separately)

B - Option

Receiving

After you receive the option package, check these items.

• Make sure that there is no damage to the option and no parts are missing.

The Yaskawa warranty does not cover damage from shipping. Immediately contact the shipping company if

there is damage to the option.

NOTICE

Damage to Equipment. Do not use damaged parts to connect the drive and the option. Failure to comply

could damage the drive and option.

• Make sure that the model number on the option nameplate and the model number on the purchase order are the

same. Refer to

Figure 4.1

• Contact the distributor where you purchased the option or contact Yaskawa or a Yaskawa representative about

any problems with the option.

Figure 2.2 Option Card Mounting Kit (JOHB-GA50)

for print location.

C - Drive front cover

YASKAWA SIEP C730600 83E CC-Link Technical Manual

Table of Contents