Install The Option On A Ga500 Drive - YASKAWA PROFINET SI-EP3 Installation Manual

2 Overview
Drive
Z1000U
*2
GA500
*2
GA700
*2
GA800
*2
CR700
*2
CH700
*2
HV600
*3
FP605
Refer to "PRG" on the drive nameplate for the software version number.
*1
*2 Before you install the option on a GA500, GA700, GA800, CR700, CH700, or HV600 drive, make sure
that the option software version is PRG: 4400 or later.
*3 Before you install the option on an FP605 drive, make sure that the option software version is PRG: 4402 or
later.
Note:
• Refer to the option package labeling in the field designated "PRG (four digit number)" or the option labeling in
the field to identify the option software version. Refer to
• For Yaskawa customers in the North or South America region:
If your product is not listed in
product. The web page provides a list of option manuals by product, and a direct link to download a PDF of
the manual.
Scan QR code Or refer to:
http://www.yaskawa.com/optionlookup
◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The
option card mounting kit model is: JOHB-GA50. This kit is sold separately.
10
Model
CIMR-UxxSxxxx
CIMR-ZxxAxxxx
CIMR-ZxxExxxx
CIMR-ZxxPxxxx
CIMR-ZxxWxxxx
CIPR-GA50xxxxx
CIPR-GA70xxxxx
CIPR-GA80xxxxx
CIPR-CR70xxxxx
CIPR-CH70xxxxx
CIPR-HV60xxxxx
CIPR-FP65xxxxx
Table 2.1, refer to the web page below to confirm this manual is correct for your
YASKAWA TOEP C730600 89B PROFINET Installation Manual
Software Version
Figure 4.1 for information.
*1
≥ 6110
≥ 1010
≥ 1010
≥ 9010
≥ 1012
≥ 1012
≥ 1011
≥ 1010