CPI CMP 200 Series Service Manual page 95

3C
Interfacing and Programming
3C.7.1 Tube Selection / Tube Setup (Cont)
The following menu is only available if additional tubes have been downloaded via a computer running GenWare®.
TUBE SELECTION screen 4
IF ADDITIONAL TUBES HAVE BEEN DOWNLOADED FROM GenWare®
THEY WILL BE DISPLAYED ON THIS SCREEN
<<
The next three menus show the default tube limits. These menus appear after a
tube has been selected in the previous steps.
TUBE DEFAULTS screen 1
*TUBE 1:
TUBE SPEED: LOW
MAX SF KW LS: 21.3
MAX LF KW LS: 58.9
MAX KV: 125
EXIT
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-26
* TUBE 1 SELECTION *
RAD60 0.6/1.2
RETURN
12º REV 1.4*
+
-
>>
®
CMP 200 X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-04 Rev. C