CPI CMP 200 Series Service Manual page 185

3C
Interfacing and Programming
3C.13.10 Touchscreen Console Firmware Upgrade / Restore (Cont)
Step
A pop-up window entitled ServerApp will open (see figure 3C-40). Locate and select the desired upgrade file and press OK. Note:
4.
All upgrade files will have the cpm extension.
Step
Another pop-up window will open entitled Select Communication Media (figure 3C-41). Select USB from the Media Types
5.
section. Do not alter the Media Config section in any way. It is set automatically.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-116
Figure 3C-40: CPI Touch Screen Updater - ServerApp screen
CMP 200
Action
Action
®
X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-04 Rev. C