13.4 Date / Time Setup - CPI CMP 200 Series Service Manual

CPI Canada Inc.
3C.13.3 APR Backup / Restore (Cont)
Step
3. To copy an APR file from the touchscreen to the USB flash drive select the desired file from the Touch Screen window and press
. Once the file is copied successfully it will appear in the USB Device window of the USB File Transfer Utility.
4. To copy an APR file from a USB flash drive to the touchscreen select the desired file from the USB Device window and press
. Once the file is copied successfully it will appear in the Touch Screen window of the USB File Transfer Utility.
5.
When finished, press Close to exit.
3C.13.4 Date / Time Setup
Use these steps to perform the date and time setup.
Step
1. From the system utilities menu, press Date / Time Setup. A pop-up window that allows setting of the date and time will display
(figure 3C-28).
TO SET THE YEAR:
2.
Press the up or down arrows adjacent to Year to select the desired year. The selected year will display to the left of the up / down
selection buttons.
TO SET THE MONTH:
3.
Press the up or down arrows adjacent to Month to select the desired month. The selected month will display to the left of the up /
down selection buttons.
TO SET THE DATE:
4.
Press to select the desired date on the calendar that is displayed.
TO SET THE HOUR
5.
Press the up or down arrows to the right of Hour to select the desired hour. The selected hour will display to the left of the up /
down selection buttons. This must be selected in 24 hour format, i.e. 2 PM would be entered as hour 14.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
®
CMP 200 X-Ray Generator Service Manual
Action
Action
Ch # 901476-04 Rev. C
Interfacing and Programming
Page 3C-95
3C