CPI CMP 200 Series Service Manual page 183

3C
Interfacing and Programming
3C.13.10 Touchscreen Console Firmware Upgrade / Restore (Cont)
Step
8.
The touchscreen will exit the Updating Touch Screen window and you will be prompted to Please change the upgrade switch
back to normal operation mode before rebooting (see figure 3C-38). Press the upgrade switch (SW1) on the back of the
touchscreen and then select OK. The touchscreen will reboot and you will be taken back to the main menu.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-114
Figure 3C-38: Change the upgrade switch pop-up window
CMP 200
Action
®
X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-04 Rev. C