7.0 Generator Configuration; 7.1 Tube Selection / Tube Setup - CPI CMP 200 Series Service Manual

3C
Interfacing and Programming
3C.7.0 GENERATOR CONFIGURATION
The GEN CONFIGURATION menu presents the user with the selections shown below. These are described in detail in this section.
TUBE SELECTION
GENERATOR LIMITS
RECEPTOR SETUP
I/O CONFIGURATION
EXIT
3C.7.1 Tube Selection / Tube Setup
The TUBE SELECTION function allows the desired tube type to be selected, and allows setting of the default limits for that tube.
The first screen of the TUBE SELECTION menus for the membrane console is shown below. This is followed by additional tube selection
menus, with additional tube types. The number of tube selection menus, and the actual tube selections, may not be exactly as shown.
TUBE SELECTION screen 1
A192B 0.6/1.2
A256 0.6/1.0
A292 0.6/1.2
A272 0.3/0.6
EXIT
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-24
* GEN CONFIGURATION *
AEC CALIBRATION
TUBE CALIBRATION
* TUBE 1 SELECTION *
G256 0.6/1.0
G292 0.6/1.2
G1082 0.3/1.0
RAD8 1.0/2.0
AEC SETUP
DAP SETUP
>>
®
CMP 200 X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-04 Rev. C