CPI CMP 200 Series Service Manual page 172

CPI Canada Inc.
3C.13.6 Touchscreen Setup (Cont)
Step
2. Check the applicable item to enable that function.
3. Press OK to continue or CANCEL to return to the system utilities menu without making any changes. If OK was pressed, a pop-
up window will display asking if you wish to save the changes. Press YES to save the changes. Press NO to return to the system
utilities menu; CANCEL cancels the changes.
Passwords
Use these steps to change the current operator and service passwords.
Step
1. From the touchscreen setup window, select PASSWORDS.
To change the operator password, press the ... button to the right of the top operator password line. A password window will pop
2.
up. Enter the new password.
•
Press Clear to cancel an incorrect entry.
•
Press Cancel to close the password pop-up window.
•
Press Accept to accept the new password.
Repeat the previous step to enter the new password on the second operator password line.
3.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
®
CMP 200 X-Ray Generator Service Manual
Action
Action
Ch # 901476-04 Rev. C
Interfacing and Programming
Page 3C-103
3C