13.11 Generator Configuration Backup And Restore - CPI CMP 200 Series Service Manual

3C
Interfacing and Programming
3C.13.11 Generator Configuration Backup and Restore
NOTE: A PERMANENT BACKUP FILE OF THE GENERATOR CONFIGURATION (RECEPTOR SETUP, AEC SETUP AND
CALIBRATION, ETC,) SHOULD BE KEPT IN THE EVENT THE GENERATOR SOFTWARE IS CORRUPTED OR A "FACTORY
DEFAULTS" IS REQUIRED. THE BACKUP FILE SHOULD BE STORED ON AN EXTERNAL STORAGE DEVICE, SUCH AS A
LAPTOP OR USB FLASH DRIVE.
NOTE: ENSURE THERE IS AN EXTERNAL USB DEVICE CONNECTED TO THE TOUCHSCREEN CONSOLE USING ONE OF THE TWO
AVAILABLE USBA PORTS AT THE REAR OF THE TOUCHSCREEN CONSOLE.
Step
1.
Touchscreen GenWare® must be launched before proceeding. This is done from the GenWare® button on the touchscreen
System Utilities menu.
2.
Press the
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-122
Figure 3C-46: Generator Configuration Backup and Restore utility
button to launch the Backup and Restore utility.
CMP 200
Action
®
X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-04 Rev. C