4.0 Generator Setup Menu - CPI CMP 200 Series Service Manual

CPI Canada Inc.
3C.3.1 Entering Into Programming Mode (Cont)
Use these steps to access the GENERATOR SETUP menu (membrane console).
Step Action (membrane console)
1. Start with the generator switched OFF.
2.
While pressing and holding the MENU
button, press the power ON button on the
console.
3. Enter the password by pressing the
button sequence: [1] - [8] - [4] - [5].
4. The GENERATOR SETUP menu will be
displayed next.
3C.4.0 GENERATOR SETUP MENU
The GENERATOR SETUP menu for the membrane console is shown below.
UTILITY
EXIT SETUP
Use and disclosure is subject to the restrictions on the title page of this CPI document.
®
CMP 200 X-Ray Generator Service Manual
* GENERATOR SETUP *
APR EDITOR: DISABLED
GEN CONFIGURATION
Ch # 901476-04
Action (PC GenWare®)
DATA LINK
Rev. C
Interfacing and Programming
Action (Touchscreen GenWare®)
Page 3C-9
3C