CPI CMP 200 Series Service Manual page 129

3C
Interfacing and Programming
3C.7.4 I/O Configuration (Cont)
Step Action (membrane console)
Reselect I/O CONFIGURATION, and
9.
then select the next receptor to be
programmed.
10.
When finished programming all receptors,
11.
exit to the GEN CONFIGURATION menu.
The input and output programming should be recorded in a copy of the table below. This will provide a record of the I/O configuration for
future reference.
FUNCTIONS
TUBE THERMAL SW.
DOOR ITLK.
INTERLOCK 1
INTERLOCK 2
BUCKY 1 RDY
BUCKY 2 RDY
BKY 1 START
BKY 2 START
ROOM LIGHT
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-60
Action (PC GenWare®)
Select the next receptor to be
programmed. Use the Receptor tabs on
the Receptor Setup window.
Program all inputs and outputs for the selected receptor.
STANDBY PREP
INPUTS
OUTPUTS
CMP 200
GEN RDY RAD EXP
®
X-Ray Generator Service Manual
CPI Canada Inc.
Action (Touchscreen GenWare®)
Select the next receptor to be
programmed. Use the Receptor buttons
on the Receptor Setup window.
Ch # 901476-04 Rev. C