CPI CMP 200 Series Service Manual page 20

CPI Canada Inc.
1.3.2 Generator Power Requirements (Cont)
The table below depicts the power requirements for the 40 kW CMP 200® / CMP 200® DR X-ray
generators.
Line Voltage
Line Frequency
Momentary Current
Nominal Current
Momentary Power Consumption
The table below depicts the power requirements for the 50 kW CMP 200® / CMP 200® DR X-ray
generators.
Line Voltage
Line Frequency
Momentary Current
Nominal Current
Momentary Power Consumption
The table below depicts the power requirements for the 65 kW CMP 200® DR X-ray generators.
Line Voltage
Line Frequency
Momentary Current
Nominal Current
Momentary Power Consumption
Use and disclosure is subject to the restrictions on the title page of this CPI document.
®
CMP 200 X-Ray Generator Service Manual
*
*
*
208 VAC - 5% to 230 VAC + 10%, 1 phase.
208 VAC - 5% to 230 VAC + 10%, 3 phase.
400 VAC ± 10%, 3 phase.
480 VAC ± 10%, 3 phase.
50/60 Hz.
250 Amps at 230 VAC (1 phase).
135 Amps/phase at 230 VAC (3 phase).
80 Amps/phase at 400 VAC.
65 Amps/phase at 480 VAC.
≤5 Amps.
55 kVA.
208 VAC - 5% to 230 VAC + 10%, 3 phase.
400 VAC ± 10%, 3 phase.
480 VAC ± 10%, 3 phase.
50/60 Hz.
145 Amps/phase at 230 VAC.
100 Amps/phase at 400 VAC.
80 Amps/phase at 480 VAC.
≤5 Amps.
65 kVA.
400 VAC ± 10%, 3 phase.
480 VAC ± 10%, 3 phase.
50/60 Hz.
125 Amps/phase at 400 VAC.
105 Amps/phase at 480 VAC.
≤5 Amps.
85 kVA.
Ch # 901476-01 Rev. C
1
Pre-installation
Page 1-17