CPI CMP 200 Series Service Manual page 190

CPI Canada Inc.
3C.13.10 Touchscreen Console Firmware Upgrade / Restore (Cont)
Step
Once the upgrade is complete, a pop-up window will display indicating Upgrade Complete. Press OK.
12.
Step
The touchscreen will exit the Updating Touch Screen window and you will be prompted to Please change the upgrade switch
13.
back to normal operating mode before rebooting (figure 3C-45). Press the upgrade switch (SW1) on the back of the
touchscreen console and then select OK. The touchscreen will reboot and you will be taken back to the Main Menu.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
®
CMP 200 X-Ray Generator Service Manual
Figure 3C-45: Change the upgrade switch pop-up window
Ch # 901476-04
Action
Action
Rev. C
Interfacing and Programming
Page 3C-121
3C