Acceptance Tests (Aec); Acceptance Tests (Dr Interface); Acceptance Tests (Dap); Acceptance Tests (Hvl, Linearity And Reproducibility) - CPI CMP 200 Series Service Manual

4
Acceptance Testing
4.6.0

ACCEPTANCE TESTS (DAP)

Recheck the appropriate steps in chapter 3D to verify the DAP calibration.
4.8.0

ACCEPTANCE TESTS (HVL, LINEARITY AND REPRODUCIBILITY)

The procedure for performing reproducibility, linearity and HVL testing is contained in a separate
document, part number 740917 that immediately follows this page.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 4-8
®
CMP 200 X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-06 Rev. A