CPI CMP 200 Series Service Manual page 13

X-ray generator
Hide thumbs Also See for CMP 200 Series:
Table of Contents

Advertisement

1
Pre-installation
1.2.2
Safety Notices and Warnings (Cont)
X-ray radiation exposure may be damaging to health, with some effects being cumulative and extending
over periods of many months or even years. Operators and service personnel should avoid any
exposure to the primary beam and take protective measures to safeguard against scatter radiation.
Scatter radiation is caused by any object in the path of the primary beam and may be of equal or less
intensity than the primary beam that exposes the film.
No practical design can incorporate complete protection for operators or service personnel who do not
take adequate safety precautions. Only authorized and properly trained service and operating
personnel should be allowed to work with this X-ray generator equipment. The appropriate
personnel must be made aware of the inherent dangers associated with the servicing of high voltage
equipment and the danger of excessive exposure to X-ray radiation during system operation.
CAUTION:
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 1-10
DO NOT CONNECT UNAPPROVED EQUIPMENT TO THE REAR OF THE
CONSOLE.
For the membrane console, J3 is for connection of an external hand switch, J4 is a
serial port for use by an external computer, and J8 is for the interconnect cable to the
main cabinet.
For the touchscreen console, GEN on the rear of the touchscreen is for the
interconnect cable to the generator, HS is for connection of an external hand switch,
COM 1 & COM 2 are serial ports for use by external devices, LO (3.5 mm stereo jack)
is for customer supplied speakers (minimum 8 ohms, do not use externally amplified
speakers), ETH is a standard 10/100 Ethernet connection, USBA and USBB are USB
ports for connection of external devices, CF is for the compact flash memory card
which holds the touchscreen software, and SW1 is the console upgrade button.
INCORRECT CONNECTIONS OR USE OF UNAPPROVED EQUIPMENT MAY
RESULT IN INJURY OR EQUIPMENT DAMAGE.
DO NOT EXCEED THE TUBE MAXIMUM OPERATING LIMITS. INTENDED LIFE AND
RELIABILITY WILL NOT BE OBTAINED UNLESS GENERATORS ARE OPERATED
WITHIN PUBLISHED SPECIFICATIONS.
®
CMP 200
X-Ray Generator Service Manual
CPI Canada Inc.
Ch # 901476-01
Rev. C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmp 200 dr series

Table of Contents