Bevel Differential Assembly - Polaris General 2020 Service Manual

TRANSMISSION

BEVEL DIFFERENTIAL ASSEMBLY

1. Thoroughly clean the differential components.
2. Install the thrust washer
the carrier.
3. Place the pinion gears
r
differential pin into the carrier.
NOTICE
Align the hole of the differential pin with the dowel pin
hole in the carrier.
7.28
q w
and output gear into
e
into the carrier and slide the
4. Insert the dowel pin through the carrier into the
differential pin.
5. Install the output gear
u
gear .
NOTICE
When installing the ring gear, align with the mark made
of the carrier during disassembly.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
t y
, thrust washer , and ring
© Copyright Polaris Inc.