Bevel Differential Assembly - Polaris RANGER 1000 2020 Service Manual

BEVEL DIFFERENTIAL ASSEMBLY

1. Thoroughly clean the differential components.
q
2. Install the thrust washer
the carrier.
e
3. Place the pinion gears into the carrier and slide the
r
differential pin into the carrier.
NOTICE
Align the hole of the differential pin with the dowel pin
hole in the carrier.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
w
and output gear into
4. Insert the dowel pin through the carrier into the
differential pin.
t
5. Install the output gear , thrust washer
u
gear .
NOTICE
When installing the ring gear, align with the mark made
of the carrier during disassembly.
TRANSMISSION
y
, and ring
7
7.27