Omega RD-MV100 Series User Manual page 99

4.5 Using the Information Screen (Alarm Summary, Message Summary, and Memory Summary)
Opening the display data file from memory summary (recalling the historical
trend).
This operation is carried out when displaying the information about the display data in
Memory Summary.
1. Select the file using the up and down arrow keys.
Selected file
2. Pressing the DISP/ENTER displays the screen menu.
3. Pressing the right arrow key displays the sub menu.
To close the sub menu, press the left arrow key.
4. Select [JUMP TO HISTORY] using the up and down arrow keys.
5. Pressing the DISP/ENTER key displays the historical trend.
To close the menu without switching the screen, press the ESC key.
Displaying the report data (option)
This operation is carried out on the Message Summary screen. For detail of the report
data, see section 11.11.
1. Pressing the DISP/ENTER displays the screen menu.
2. Pressing the right arrow key displays the sub menu.
To close the sub menu, press the left arrow key.
3. Select [REPORT DATA] using the up and down arrow keys.
4. Pressing the DISP/ENTER key displays the report data.
To close the menu without displaying the report data, press the ESC key.
Changing the report data to be displayed
"The index number of the report data currently displayed/the number of report data sets
in the internal memory" is displayed in the [Index] column of the report data display. The
most recent report data set is the one with the largest report data index number.
When the report data are being displayed, the arrow keys can be pressed to switch the
report being displayed. The operation when the four arrow keys are pressed are as follows :
Up arrow key :
Down arrow key : Displays the previous report data.
Right arrow key : Displays the report data that is 10 data sets after the report data being
Left arrow key :
Displays next report data.
displayed. However, if there are less than 10 data sets, the most
recent report data (with the maximum report data number) are
displayed.
Displays the report data that is 10 data sets before the report data
being displayed. However, if there are less than 10 data sets, the
oldest report data (report data number 1) are displayed.
4
4-15