Omega RD-MV100 Series User Manual page 136

7.2 Selecting Tag Display or Channel Display
(Basic Setting Mode)
Procedure
7-2
Select whether tags or channel numbers are to be displayed on the operation screen
(trend display, digital display, etc.). The initial setting is [Channel]. Tag names are set in
the setting mode.
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Next 1/3
Press the soft key
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Tag/Channel
Select [Tag] or [Channel].
Tag : Display tags.
Channel : Display channel numbers.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Note
If a channel is set to display the tag, but the tag name is not entered, the channel will display
the channel number.
.
#5
1
.