Omega RD-MV100 Series User Manual page 205

Logging out
1.
2.
Auto logout
This function is available in the operation mode.
If there is no key operation for ten minutes, the user is automatically logged out. The
auto logout function can be activated in the basic setting mode.
Explanation
Power up operation
Logout operation
Auto logout
When the basic setting mode is terminated
When the basic setting mode is terminated and the mode returns to the operation mode,
the recorder is in the logged out condition.
Saving the user name
The user name is stored to the display and event data files at the following points : when
the display or event data acquisition starts and ends and when a message is written.
The user name is displayed in the status display section.
User name
Press the FUNC key. The [Logout] soft key is displayed.
Press the [Logout] soft key. The user name shown in the status display section
disappears.
Power ON
Log out status
Login operation
or
FUNC key
Password
User ID
Operation mode
10.3 Using the Key Login/Logout Function
10
10-5