Omega RD-MV100 Series User Manual page 146

7.8 Setting the Channel Display Colors (Trend, Bar
Graph)
Procedure
Explanation
7-12
Trend and bar graph colors can be specified for each channel.
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Next 1/3
Press the soft key
#5
Press the soft key
Setting on a measurement channel
To display the setting screen press the soft key
Setting on a computation channel (option)
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Channel display color
Move the cursor to the desired channel and set the channel display color (select
from 16 colors).
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Initial settings of channel display color
Channel 1 : Red, Channel 2 : Green, Channel 3 : Blue, Channel 4 : Blue violet, Channel
5 : Brown, Channel 6 : Orange, Channel 7 : Yellow-green, Channel 8 : Light blue,
Channel 9 : violet, Channel 10 : Gray, Channel 11 : Lime, Channel 12 : Cyan
Available colors for the channels
Red, green, blue, blue violet, brown, orange, yellow-green, light blue, violet, gray, limes,
cyan, dark blue, yellow, silver, and purple
.
.
#2
#5
1
.
.