Omega RD-MV100 Series User Manual page 254

Code Message
285 FTP data connection error.
Further details are provided by the character string that appears after error code 285.
Character String and Details
SOCKET
BIND
CONNECT
LISTEN
ACCEPT
SOCKNAME
RECV
SEND
286 FTP file transfer error.
*1 See the RD-MV100 Communication Interface User's Manual (M3643).
*2 Contact your nearest Omega dealer.
*3 These errors may occur if the network experiences trouble during the data transmission (bad
Note
•
•
•
Communication Errors
For information regarding the communication function of this recorder, see the RD-
MV100 Communication Interface User's Manual (M3643).
• Errors during Setting and Basic Setting Modes, Output Communication Command
Execution, and Setup Data Loading
Code Message
300 Command is too long.
301 Too many number of commands delimited with ';'.
302 This command has not been defined.
303 Data request command can not be enumerated with sub-delimiter.
350 Command is not permitted to the current user level.
351 This command cannot be specified in the current mode.
352 The option is not installed.
353 This command cannot be specified in the current setting.
354 This command is not available during sampling or calculating.
Failed to create a socket for the transfer connection.*
Failed the transfer connection command.*
3
Failed the transfer connection.*
Failed the transfer connection reception.*
Failed to accept the transfer connection.*
2
Internal processing error.*
Failed to receive data over the transfer connection.*
Failed to send data over the transfer connection.*
cable connection, duplicate addresses, network equipment failure).
The FTP client function on the recorder has a timer function that drops the connection if there
is no data transfer for two minutes. If the server does not respond within this time period, the
transfer fails.
The FTP client function on the recorder overwrites files with the same file names on the
server without any warnings, unless the server rejects the request.
For information regarding the FTP client function of this recorder, see the RD-MV100
Communication Interface User's Manual (M3643).
12.1 A List of Messages
3
3
3
3
3
3
12
12-5