Omega RD-MV100 Series User Manual page 19

Chapter 1 Overview of Functions
1.1 Overview of the RD-MV100
Unlike conventional recorders that record data on charts, the RD-MV100 displays the
measured data acquired in the internal memory to a LCD in the form of waveforms,
numerical values, and bar graphs. The measured data can also be saved to external
storage media such as floppy disks, Zip disks, and ATA flash memory cards.
The data that have been saved to an external storage medium can be displayed on a PC
using the standard software that comes with the package. The data can also be loaded
into the RD-MV100 to be displayed.
By using the Ethernet interface that comes standard with the RD-MV100, the data can
be transferred to a server on a network (client function). The data stored on the RD-
MV100's external storage medium can also be read from a PC on the network (server
function).
PC
The communication functions such as the Ethernet interface are not covered in this
manual. See the RD-MV100 Communication Interface User's Manual (M3643).
RD-MV100
RD-MV100
RD-MV100
Server
Data on the external storage medium
RD-MV100
External storage media
Measured data
Primary Secondary
RD-MV100
Floppy disk
Zip disk
ATA flash memory card
1-1
1